Practical Analog Design Techniques

發布時間：2010-8-28 09:41 發布者：techieboy

關鍵詞： Analog , Design , Practical , Techniques

實用模擬電路設計技術，英文版

SECTION 1
SINGLE-SUPPLY AMPLIFIERS
Rail-to-Rail Input Stages
Rail-to-Rail Output Stages
Single-Supply Instrumentation Amplifiers
SECTION 2
HIGH SPEED OP AMPS
Driving Capacitive Loads
Cable Driving
Single-Supply Considerations
Application Circuits
SECTION 3
HIGH RESOLUTION SIGNAL CONDITIONING ADCs
Sigma-Delta ADCs
High Resolution, Low Frequency Measurement ADCs
SECTION 4
HIGH SPEED SAMPLING ADCs
ADC Dynamic Considerations
Selecting the Drive Amplifier Based on
ADC Dynamic Performance
Driving Flash Converters
Driving the AD9050 Single-Supply ADC
Driving ADCs with Switched Capacitor Inputs
Gain Setting and Level Shifting
External Reference Voltage Generation
ADC Input Protection and Clamping
Applications for Clamping Amplifiers
Noise Considerations in High Speed Sampling ADC Applications
SECTION 5
UNDERSAMPLING APPLICATIONS
Fundamentals of Undersampling
Increasing ADC SFDR and ENOB using External SHAs
Use of Dither Signals to Increase ADC Dynamic Range
Effect of ADC Linearity and Resolution on SFDR and
Noise in Digital Spectral Analysis Applications
Future Trends in Undersampling ADCs
SECTION 6
MULTICHANNEL APPLICATIONS
Data Acquisition System Considerations
Multiplexing
Filtering Considerations for Data Acquisition Systems
SHA and ADC Settling Time Requirements in Multiplexed Applications
Complete Data Acquisition Systems on a Chip
Multiplexing into Sigma-Delta ADCs
Simultaneous Sampling Systems
Data Distribution Systems using Multiple DACs
SECTION 7
OVERVOLTAGE EFFECTS ON ANALOG INTEGRATED CIRCUITS
Amplifier Input Stage Overvoltage
Amplifier Output Voltage Phase Reversal
Understanding and Protecting Integrated
Circuits from Electrostatic Discharge (ESD)
SECTION 8
DISTORTION MEASUREMENTS
High Speed Op Amp Distortion
High Frequency Two-Tone Generation
Using Spectrum Analyzers in High Frequency
Low Distortion Measurements
Measuring ADC Distortion using FFTs
FFT Testing
Troubleshooting the FFT Output
Analyzing the FFT Output
SECTION 9
HARDWARE DESIGN TECHNIQUES
Prototyping Analog Circuits
Evaluation Boards
Noise Reduction and Filtering for
Switching Power Supplies
Low Dropout References and Regulators
EMI/RFI Considerations
Sensors and Cable Shielding

實用模擬電路設計技術.rar (4.7 MB)

本文地址：http://www.qingdxww.cn/thread-24210-1-1.html 【打印本頁】

本站部分文章為轉載或網友發布，目的在于傳遞和分享信息，并不代表本網贊同其觀點和對其真實性負責；文章版權歸原作者及原出處所有，如涉及作品內容、版權和其它問題，我們將根據著作權人的要求，第一時間更正或刪除。